Thank YOU!

I just wanted to take a moment to say Thank You to everyone that follows or visits my blog.  This month, the blog hit the 10,000 mark since I started writing.  Oct has already had 2333 hits, which is an all time high for a month and Sept had over 1900 hits.  I feel like maybe I am doing something right.....

I have so much material on the site now, that I am going to start looking at ways to simplify things.  On, other blogs, when you click on page, Say DIY, there are all these little links that you can view and click on the ones that interest you.  I've looked at the Linky site, but just really don't understand how it works.  Whew.....I am not computer smart.  Maybe, I should take a computer class.  But, I have been so busy with projects that I just haven't seemed to have the time.  But, with COLD weather in the forecast, it should work into my schedule soon.

Thanks Again for visiting me!  Please feel free to comment on things that you like, what you would do different, if you have done the same project, any hints.  I would love to hear from you.

Pallet Table

I was on a roll this week with wood and pallet projects.  I needed a table for a hallway, so I made this one.  I made a Magazine/End table, this Table and a shelf out of two pallets.  I have part of pallet still left, but the wood is pretty bad. The tops, shelves and some trim were scraps.

Measures 42" long x 29 1/2" tall x 14 1/4" deep

 The hallway is kinda dark, so I thought COLOR!  Pictures really do not do justice.  The top of this table is FABULOUS!

 One end/side, add screws to make it more stable.  I added a piece of wood horizontal across the cut end, that is the bottom of legs

 Then I flipped it on its top and secured a piece of wood under top braces to hold the ends in place.  I then checked to make sure it was sitting level.  And I added the cross pieces.  I am not going to show you the back, because it isn't perfect. But, from the front, it looks good.  Use SCREWS and then if you have to take something back apart, it is easy.....

 Then, I added the bottom shelf and YIKES my table got uneven.  I haven't done many wood projects by myself, much less using pallets.  This is why I said, "Use Screws." I took the cross pieces back off and table was still uneven.  I was still scratching my head when hubs got home.  It took him about two seconds to realize that the wood pieces that I had attached the shelf to were not level.  It was level on top, but not on the bottom.  @@@ I said this is the same pallet, DUH, it is a pallet and they are not measuring and leveling when they put these together.  I won't make that mistake again.  The right side was lower than the left, so we used a piece of wood to shim it up.  Perfect, I was finally ready to finish putting it back together.

I then put the trim pieces down the front and the TOP last.  Yep, I have made that mistake, measuring and cutting the top piece before all trim is on and then not having any hang over on the front and sides.  I used all pallet wood except the shelf and top.  The shelf is out of (2) 1"x6" and the top is(2) 2" x 8"

 Love this....adds character, where insects drilled/ate out the wood.

 Then, I watered down some White paint and White washed it.  Painted the shelves with Black and before it was dry, I painted on RED.

 Then Turquoise....Let it dry....And Sanded....See the Red

 I wanted a bit more color.  I had beat up the wood to add dings in.  I took an artist brush and dabbed yellow and green into some of those dings and then wiped across it with a damp paper towel.

 Then, I sanded.....again and brushed on a dark stain...and wiped off

 Pictures Really do NOT do justice.

I love how it turned out!  Have you done any Pallet projects?

Don't Lurk.....Leave me a comment or question, so I know that you were here. Thanks for visiting and take awhile to look around.

Pallet Projects

 Yep, Pallet Projects are all the Rave!  And of course I have extra on hand, because we use them in the hay barn. The weather has finally cooled and I have a great place to work in...The Garage/Party room (yep it is here on the blog)

 I made a Pallet Bar for a friend awhile back, but haven't made anything for me.  And, I am really wanting an outside BAR.  I had been thinking about those pallets.  I had already cleaned up two of them and they were just sitting around waiting on me.  I was standing there looking at the pallet and it just came to me...yes the light comes on like that for me.   A magazine end table to go at the end of the couch.  At my other home, on one end of the couch there is no room for a standard end table, really no room at all.  So, where does everyone want to sit.....on the other end, so you can put your coffee down on the table.  

So, now my mind is racing!  I get my tape measure and come in the house to measure how tall end tables are and check on the length I need.  I go back out with my measuring tape and pick the one that already is together, almost the way I need it....OMgosh, almost too simple.

I have been reading a lot on pallets lately and did not realize that they were heat treated and chemical treated.  They are stamped to show which treatment that they received.  Mine, did not have anything stamped on them.  I am hoping they were not Chemical treated as they are going in my house.

Checking to see if one section will work for the length needed.

 I had already almost completed Two projects by the time hubby got home.  I had been prying boards off by using a large Screw driver (driving it down behind the planks) with a hammer.  Then, he picked up a scrap piece of board and started doing it this way.  Just go on and cancel your gym membership, if you going to take up building with pallets.

Added screws to make more secure.

I added feet (pallet boards) on the bottom, because this table is narrow and will tip easy.  The boards will slide under the couch.

I used a 6" piece of rough cut cedar to go on the top and to trim out the front.  I love this little tool for straight/square lines.

Top on and front needs a trim piece

I was trying to decide if I wanted to stain completely or go more rustic.  I went for a full coverage

 Here it is Finished and it actually works real well at this house too.  Looks like I may be making another one!

Great place for a coffee cup or a glass, right there in the horseshoe.

I really LOVE it!  My dad called and asked what I was doing.  I said, "I am making tables out of Pallets." and he said, "Really?"  "I guess, I will just have see that....."  They came in town over the weekend and I must say, I think he was impressed!

***And here is where it was designed to be used.  See the door, there is no room for a full size table.  But, now that end of the sofa is getting used.  And, guess what?  That end of the sofa need broken in, feels firmer than the other......

Don't be a Lurker...Let me know what you think about my projects or leave me a question.
Thanks for visiting and please look around.